[ใหม่] ชุดพัฒนาเรียนรู้ การใช้งาน RFID กับ Microcontroller Microchip PIC รวม วงจร PCB และ Source code
620 สัปดาห์ ที่แล้ว
- เชียงใหม่ - คนดู 1,364
5,500 ฿
รายละเอียด
ชุดพัฒนาเรียนรู้ การใช้งาน RFID กับ Microcontroller Microchip PIC
รวม วงจร PCB และ Source code
รายละเอียด RFID Microcontroller Board
=========================================
รายละเอียดเพิ่มเติม ติดต่อ
อดุลย์ 081-6452400 e-mail fongwe_a@hotmail.com
http://www.tarad.com/allnet
=========================================
Microcontroller Board Features
Microcontroller : Microchip PIC18F4539 or Compatible 40 pin with Socket.
- 20 MHz System clock.
- Built in : RTC ( Real Time Clock DS1307+ )
- Built in : Buzzer.
- 16 x 2 Character LCD Display.
- 4 Push Bottom Switch and 4 LED logic status.
- 2 x RS232 Com port and Switch Selector.
- DC in 6-30 V. with 7805 Regulator.
Output Control RFID : UART Interface Baud Rate 9600 – 115,200 bps ( 19600 bps default )
RFID Tag Support : Up to the RFID Module.
RFID Module Features
Being developed based on NXP's transponder IC, HF RFID Module is a Mifare read/write module.
It supports Mifare 1K, Mifare 4K and Ultralight and is applicable for 13.56MHz. It does auto Real-time detecting tag which moves into or out of detective range and reports through one output pin's logic level. In addition, it integrates all necessary components and antenna into one PCB. The external Micro-controller can work with Module to read/write Mifare cards by simple serial communication command.
• Tag supported: Mifare 1K, Mifare 4K, Mifare UltraLight
• Auto finding cards.
• Built-in antenna.
• TTL UART interface
• Power supply: DC4.5V ~ 5.5V
• Operating distance: Up to 80mm, depending on tag
• Storage temperature: -40 ?C ~ +85 ?C
• Operating temperature: -20 ?C ~ +70 ?C
• Size: 80 ? 55 ?7 mm.
• Two LED, green led is auto light when card in, red led is controlled by host.
• The Card Status pin is low level indicating card in, and high level indicating card.
PIN Information
1 Card Status Output Card detect signal
2 TXD Output Serial output port
3 RXD Input Serial input port
4 VCC PWR Power Supply
5 GND PWR Ground
=========================================
รายละเอียดเพิ่มเติม ติดต่อ
อดุลย์ 081-6452400 e-mail fongwe_a@hotmail.com
=========================================
รวม วงจร PCB และ Source code
รายละเอียด RFID Microcontroller Board
=========================================
รายละเอียดเพิ่มเติม ติดต่อ
อดุลย์ 081-6452400 e-mail fongwe_a@hotmail.com
http://www.tarad.com/allnet
=========================================
Microcontroller Board Features
Microcontroller : Microchip PIC18F4539 or Compatible 40 pin with Socket.
- 20 MHz System clock.
- Built in : RTC ( Real Time Clock DS1307+ )
- Built in : Buzzer.
- 16 x 2 Character LCD Display.
- 4 Push Bottom Switch and 4 LED logic status.
- 2 x RS232 Com port and Switch Selector.
- DC in 6-30 V. with 7805 Regulator.
Output Control RFID : UART Interface Baud Rate 9600 – 115,200 bps ( 19600 bps default )
RFID Tag Support : Up to the RFID Module.
RFID Module Features
Being developed based on NXP's transponder IC, HF RFID Module is a Mifare read/write module.
It supports Mifare 1K, Mifare 4K and Ultralight and is applicable for 13.56MHz. It does auto Real-time detecting tag which moves into or out of detective range and reports through one output pin's logic level. In addition, it integrates all necessary components and antenna into one PCB. The external Micro-controller can work with Module to read/write Mifare cards by simple serial communication command.
• Tag supported: Mifare 1K, Mifare 4K, Mifare UltraLight
• Auto finding cards.
• Built-in antenna.
• TTL UART interface
• Power supply: DC4.5V ~ 5.5V
• Operating distance: Up to 80mm, depending on tag
• Storage temperature: -40 ?C ~ +85 ?C
• Operating temperature: -20 ?C ~ +70 ?C
• Size: 80 ? 55 ?7 mm.
• Two LED, green led is auto light when card in, red led is controlled by host.
• The Card Status pin is low level indicating card in, and high level indicating card.
PIN Information
1 Card Status Output Card detect signal
2 TXD Output Serial output port
3 RXD Input Serial input port
4 VCC PWR Power Supply
5 GND PWR Ground
=========================================
รายละเอียดเพิ่มเติม ติดต่อ
อดุลย์ 081-6452400 e-mail fongwe_a@hotmail.com
=========================================
RFID Project : http://rfidbee.blogspot.com/
Microcontroller Kits Projects : http://microcontrollerkits.blogspot.com/
Digital Oscilloscope Project: http://digitaloscilloscopeproject.blogspot.com/
Web Store
EasyMoney Ideas with Ebooks : http://www.digital2u.net/
World Peace University ( Thailand )
LED Lighting Kits by Google Site
Computer Network Course by Google Site
Microcontroller Programming C by Google Site
Basic Electronic & Digital Technology