[มือสอง] ขาย power amp + pre amp exposure 3010s2 made in England สภาพเทพ สวยมาก

ขาย power amp + pre amp hiend ของ exposure 3010s2 made in England สภาพเทพ สวยมาก พร้อมกล่องเดิม ไม่เคยซ่อม เสียงดีสุดยอดสไตล์ผู้ดีอังกฤษ อุปกรณ์ครบพร้อมรีโมท ซื้อมาร่วมแสน ขายรวมไม่แยกชิ้น การันตีเสียงดีมากเหมาะกับลำโพงทุกประเภทได้รับคำชมมากมายในเน็ท ตปท.
ดูสเปคกัน
Exposure 3010S2 STEREO POWER AMP (TITANIUM)

Ideal for driving difficult speaker loads, the 3010S2 Stereo Power Amplifier is an exceptional
companion for the rest of the 3010S2 range. With the option to bi-amp, where the power amp
can drive the woofers in the speaker system and the integrated amp can drive the tweeters,
this unit will help improve the performance of your hi-fi separates system limitlessly.

Product Features
• 110 watts per channel into 8 ohms
• Ideal for driving difficult speaker loads in bi-amping mode with the?3010S2 Integrated Amplifier
• Switchable to mono mode for easy bi-amping
• High capacity, custom-made toroidal power transformer and power supply capacitors
• Clean and extended low frequency performance
• All aluminium casework and extruded front panel controls resonance and stray electro-magnetic fields
• High quality capacitors used in the signal path
• Three year warranty
• Available in Black and Titanium
Product Specifications
• Power Output: 110W per Channel (stereo) at 1kHz into 8 Ohms
• Input Impedance: 18k Ohms
• Frequency Response: 20Hz - 20kHz +/-o.5dB
• Total Harmonic Distortion: <0.015%
• Signal to Noise Ratio: >100dB
• Channel Separation: >60dB, 20Hz - 20kHz
• Mains Supply: 110/120V or 220/240V, 50/60Hz
• Power Consumption: <400VA, 8 Ohm load both channels driven
• Dimensions HxWxD (mm): 115 x 440 x 300
• Weight:? 12kg
• Exposure 3010S2 PRE AMP (TITANIUM)

Large custom made toroidal power transformer and smoothing capacitors for power supply
Plug in MM or MC phono stage available, all discrete transistor audio stages
6 line inputs or 5 plus optional phono card, 2 main out (RCA) and 1 tape output
High quality relays used for input source selection
Full remote control of input selector, volume and mute
Audio output stages utilising discrete transistor class A output buffer
High quality all aluminium case work

Specifications:
• Gain (at 1KHz) : +18dB
• Sensitivity : 250mV
• Maximum output : >10V RMS
• Frequency response : -3dB at 1Hz and 56KHz, ref. 1KHz, max volume
• Total Harmonic Distortion : <0.01% @ 1.6V RMS output, 1KHz
• Signal to Noise ratio : >96dB, A weighted, ref. 1.6V RMS output, 1KHz
• Channel Separation : >60dB 20Hz to 20KHz (Typically > 85dB@ 1KHz)
• Outputs : 2 pairs RCA, pre amp output, 1 pair for tape output
• Mains Supply : 110/120V or 220/240V, 50/60Hz (factory set)
• Power Consumption : <25VA
• Dimensions - H x W x D : 90mm x 440mm x 300mm
• Nett Weight (unpacked) : 7kg
• Gross Weight (packed) : 9kg

นัดขอชมของจริงได้ครับ