[ใหม่] แอมป์โวล์ลาย TOA รุ่น A-1806

429 สัปดาห์ ที่แล้ว - กรุงเทพมหานคร - คนดู 84

13,300 ฿

  • แอมป์โวล์ลาย TOA รุ่น A-1806 รูปที่ 1
รายละเอียด
แอมป์โวล์ลาย TOA รุ่น A-1806
ราคา : 15630
โปรโมชั่น : 13,300.00 บาท 
รายละเอียดย่อ :
มิกเซอร์ เครื่องขยายเสียง ประกาศ 2 โซน 60 วัตต์ แอมป์ขยายเสียงระบบ Mixer Power Amplifiers 60W.
รายละเอียดทั้งหมด :
TOA A-1806 แอมป์ขยายเสียงระบบ Mixer Power Amplifiers 60W.
 
มิกเซอร์ เครื่องขยายเสียง ประกาศ 2 โซน 60 วัตต์ แอมป์ขยายเสียงระบบ Mixer Power Amplifiers 60W.
 
A-1806 (60W):
A-1806 (60W)

 

  • A-1806 (60W)
    Multi-purpose, multi-function mixer/power amplifiers specifically designed for maximum versatility and cost-effective high-performance are ideal units for any PA requirement in locations such as schools and offices and other intermediate size environments. A choice of different power outputs are offered as well as functions such as paging and dual zone coverage.
Specification 
Power SourceAC mains 50/60Hz, or 24V DC (M4 screw terminal)
Output60W
Power ConsumptionAC operation: 158W (rated output), 66W (EN60065)
24V DC operation: 3.8A (rated output), 1.6A (EN60065)
Frequency Response50 - 20,000Hz ±3dB
DistortionUnder 2% at 1kHz, rated power
InputMIC 1: -60dB*, 600Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack DIN socket (5 pins)
MIC 2, 3: -60dB(*1), 600Ω, electronically-balanced, combined type of XLR-3-31 Equivalent and phone jack
AUX 1(MOH): -20dB*, 10kΩ, unbalanced RCA pin jack
AUX 2: -20dB(*1), 10kΩ, unbalanced, RCA pin jack
AUX 3: -20dB(*1), 10kΩ, unbalanced, RCA pin jack combined type of XLR-3-31 and phone jack
TEL(*2): -20dB*1, 10kΩ, electronically-balanced, M3 screw terminal
OutputREC: 0dB(*1), 600Ω, unbalanced, RCA pin jack
LINE 1,2(*3): 0dB(*1), 600Ω, unbalanced, RCA pin jack
MOH: 0dB(*1), 600Ω transformer balanced, M3 screw terminal
SPEAKER SELECTOR:
2 zone, high impedance (100V line/167Ω), individual selector switch, M4 screw terminal
DIRECT SPEAKER OUT:
High impedance (100V line/167Ω),M4 screw terminal
Low impedance (4 - 16Ω), M4 screw terminal(Both Low and High impedance terminals cannot be used at the same time.)
Phantom PowerON or OFF for each MIC 1 - 3 with switch setting
S/N ratio
(Band Pass: 20 - 20,000Hz)
Over 100dB (Master volume: min)
Over 76dB (Master volume: max)
Over 60dB (MIC 1 - 3))
Over 76dB (AUX 1 - 3)
Over 90dB (TEL)
Over 96dB (EMERGENCY)
Control InputBass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
TEL: No-voltage make contact input, open voltage: 24V DC, short-circuit: under 5mA, M3 screw terminal
EMERGENCY (*4): No-voltage make contact input, open voltage: 24V DC, short-circuit: under 10mA, M3 screw terminal
Control OutputPower remote: Open collector output, withstand voltage: 35V DC, control current: under 50mA, M3 screw terminal
Indicator5 point LED output level meter, Power indicator LED, Zone indicator LED, Emergency LED, TEL LED
PriorityEMERGENCY: Overrides other inputs
TEL: Overrides other inputs except “EMERGENCY”, ON/OFF selectable with switch setting
MIC 1: Overrides other inputs except “EMERGENCY & TEL”, ON/OFF selectable with switch setting
Operating Temperature-10ºC - +40ºC
FinishPanel: ABS resin, black, hair line
Case: Steel plate, black
Dimensions420 (W) x 107.7 (H) x 367 (D)mm
Weight9.4kg
AccessoryPower cord x 1,
Terminal block cover x 1,
Terminal block cover mounting screw x 2
OptionRack mounting bracket: MB-25B,
Volume control cover: YA-920,
Input transformer: IT-453A
Note*(*1) 0dB = 1V
(*2) Can be transformer-balanced with the addition of optional IT-453A input transformer.
(*3) LINE 1 and LINE 2 outputs can be interlocked with ZONE 1 and ZONE 2 speaker selectors, respectively. (This function needs internal modification.)
(*4)Operation when activated can be selected from the following: Turning ON the unit's power (factory-preset) or OFF. (The OFF function needs internal modification.)