[ใหม่] จำหน่าย กาว UV DELO สำหรับงาน Electronics and electrical engineering สนใจโทร.02-7134908
รายละเอียด
จำหน่าย กาว UV DELO สำหรับงาน Electronics and electrical engineering สนใจโทร.02-7134908
Fixing of coil wires
DELO-PHOTOBOND 4496
Properties
- Light-curing. One-component acryl ate
- Curing in approx. 50 seconds.
- Very high equalization of tensions due to high elasticity. Elongation at tear : 300 %
- Additional mechanical protection in case of, e. g., vibration or subsequent infection-molding.
Application
Fixing of coil wires to coil holders
(Adhesive colored blue to Indicate application area)
Bonding of ferrite cores
DELO-ML 5327
Properties
- Anaerobic-curing adhesive
- One-component, low-viscous: 300mPas
- Easy processing
- Initial strength after 1 second is possible
- Thinnest layer thickness < 20 um is achievable
- Very good vibration resistance
Application
Fast and reliable bonding of ferrite cores with DELO-ML
(Adhesive colored blue to Indicate application area)
Bonding of miniature loudspeakers
DELO-PHOTOBOND
Properties
- Light-curing acrylates
- Optimally adjusted viscosity for micro dispensing
- Bonding of various materials such as metal,
polyamide, polycarbonate, and copper
- Ensures optimal acoustic properties
- Very fast curing in 2-3 seconds
- Excellent humidity resistance
Application
Bonding of Individual components of miniature loudspeakers
For mobile phones, dictating machines etc. with different DELO
PHOTOBOND product.
Bonding of housings
DELO-MONOPOX 6093
Properties
- Epoxy casting resin
- One-component.
Medium-viscous: 40,000 mPas
- Very good adhesion to PBT
- Highly resistant to oil and gasoline
- Fast curing in approx. 30 minutes at + 130 ºC.
Plus component heating
Application
Bonded cover and housing of on electronic control unit for automobiles
Bonding of contact springs
DELO-KATIOBOND 4552
Properties
- Light-activated epoxy resin
- One-component, low-viscous: 1,200 mPas
- Temperature of use: up to + 150 ºC.
- Contact resistance is not influenced up to 10 switching cycles
- Inline curing in 30 seconds
- Dry surface
Application
Bonding of contact springs into safety relays
Flip-chip bonding
DELO-MONOPOX NU
Properties
- Heat-curing epoxy resin
- Very good adhesion to PET
- Fast curing enables short cycle times
- High ion purity
- Very low water absorption (0.3%)
Application
Smart card module flip – chip bonding
Fixing of SMD components
DELO-MONOPOX MK096
Properties
- Heat-curing epoxy resin
- One-component, highly thyrotrophic, pasty
- High wet strength
- Universal adhesion
- Suitable for high speed processes (> 30,000 dots/h)
- Gasing-and corrosion-relieved
Application
Fixing of SMD components, especially of melts and glass SMD components
Securing of soldered contacts
DELO-KATIOBOND 4597
Properties
- Light-activated epoxy resin
- One-component,
High-viscous: 48,000 mPas thix.
- Optimal absorption of vibrations
- Adjusted flow behavior due to thyrotrophic setting
- Good adhesion to miscellaneous component surfaces
- Curing in 6-30 seconds
Application
Vibration protection of soldered electronic components, e. g.,
Capacitors
Casting of circuit carriers
DELO-DUOPOX 6963
Properties
- Epoxy casting resin
- Two-component, low-viscous: 5,000 mPas
- High resistance to temperatures of up to + 150 ºC.
- Low curing shrinkage
- Minimum water absorption
- High creep resistance and dielectric strength
Application
Casting of electronic circuit carriers
Corrosion protection of soldered contacts
DELO-KATIOBOND KB554
Properties
- Light-activated epoxy resin
- One-component, low-viscous: 1,500 mPas
- High resistance to temperature changes
Due to flexible setting
- Very good wetting of soldered contacts
- Corrosion-relieved
- Curing in approx. 30 seconds
Application
Corrosion protection of soldered confects on e. g., printed circuit boards
Sealing of electronic housings
DELO-GLUM SI480
Properties
- Silicone
- One-component, low-viscous: 17,000 mPas
- Oxime cross linking, excellent corrosion protection
- Highly flexible from -50 ºC to + 180 ºC
- Curing at room temperature
- Low water absorption
- Tension-equalizing
Application
Fixing /sealing of a printed circuit board in a housing
Sealing of PBT airbag sensors
DELO-KATIOBOND 4591
Properties
- Light-activated epoxy resin
- Cycle times < 6 a are possible
- Very good adhesion and sealing
- Good long-term stability
- Good adhesion to PC also
- High reliability
Application
Sealing of PBT airbag sensors
Chip encapsulation for electronic components
DELO-MONOPOX GE720
Properties
- Epoxy casting resin
- High glass transition temperature TG
- Very good media resistance
- Low coefficient of expansion
- One-component, heat-curing, filled
Application
Chip encapsulation for electronic components in the automotive sector and in high-quality industrial products.
Coating of electrical contacts
DELO-PHOTOBOND 4496
Properties
- Light-curing acryl ate
- One-component, medium-viscous: 17,000 mPas thix.
- Optimal flow behavior
- Curing in 15 seconds is possible
- Resistant to (salt) water
- Maximum peel strength and flexibility
Application
Coating of electrical contacts of heaters for automobile exterior mirrors
Casting of electronic connections
DELO-KATIOBOND 4552
Properties
- Light-activated epoxy resin
- One-component, low-viscous: 1,200 mPas
- Good flow behavior
- Very good adhesion to miscellaneous component surfaces
- High glass transition temperature TG
- Curing in 20 seconds
Application
Casting of electronic connections after the soldering process
Bonding of coil carriers
DELO-KATIOBOND 4594
Properties
- Light-activated epoxy resin
- One-component, high-viscous: 32,000 mPas
- Gap-filling
- No dirt accumulation due to completely dry surface
- Excellent humidity protection of sensitive copper coil wires
Application
Bonding of coil carriers into, e. g., coin acceptation units
Casting of switches
DELO-KATIOBOND 4578
Properties
- Light-activated epoxy resin
- One-component, medium-viscous: 12,400 mPes thix.
- Good flow behavior due to thixotropic setting
- Very good adhesion to miscellaneous component surfaces
- High glass transition temperature TG
- Curing in 20 seconds
Application
Casting of switches for the automotive sector
Tel: 02-713-4908, 084-088-1960, 088-650-3663
Fax: 02-713-4909
E-mail: sales@greatadvance.co.th
www.greatadvance.co.th